SMTall: 7.Counter

SMD Assembly Special Sale 2020'

남아전자산업에서는 2020년 신제품/전시/중고 장비에 대하여 한시적 특가판매 이벤트를 진행합니다.

관심있는 업체들의 문의 바랍니다.

기간 : 판매 소진시 종료

그간 30년이상 지속적인 사랑과 관심으로 성장해 온 NamA Electronic에서 고객분들께 깊은 감사를 드립니다.

코로나 바이러스로 인하여 힘든 시기를 보내고 있습니다.

한국 제조산업의 생산성 향상 및 침체탈피에 도움이 되고자, 보탬이 될 수 있는 장비에 대하여 한시적 특가 판매를 하기와 같이 진행함을 말씀드립니다.

장비의 내구성 및 유지보수에 대하여 남아전자산업에 보증 합니다.

양질의 생산성. 품질향상 장비를 공급될 수 있도록 최선을 다하겠습니다.

별도 문의된 내용은 E.info@namasmt.com연락 주시면 언제 어디서나 Message을 받을 수 있습니다.

Website.www.namaSMT.com

E-mail.info@namasmt.com

Tel.02.3141.0889

Event 1. 무상점검 이벤트

점검 대상기존 NamA 제품 (리플로우, 부품계수기) 구입고객

점검 내용장비 전반적 문제 점검

무상점검 기간~ 6/30 접수분

Event 2. 특가판매 _ 제품 리스트

다양한 제품의 특가판매 진행 및 중고/전시 제품의 특별판매를 진행합니다.

제품별로 20~30%DC가 제공됩니다.

* 각 제품별 전시/중고 제품 수량이 상이합니다.

* 수량은 한정수량입니다

1. Fearture

Double-check feature ensures accuracy
Pocket Check(Missing Parts-Only Giga S) feature stops counting and stop or pass depending on setting when an empty pocket is encountered.
Adjustable pocket check sensor height unlike other products adopt fixed sensor height
Stepping Motor(Semi Permanent Product) instead of AC motor which needs to be replaced periodically
Can complete a 5,000 part reel in 60 seconds(with pitch = 1)
3 Play modes (Short, Normal, Auto-alighment)
Count forward and backward
Audible alarm indicates preset count has been reached
Built in memory allows you to preset count Q'ty
Accommodates to 440mm diameter.
Anti-Static Connector
Multi Interface (USB Ports(op), RS-232C Ports,Extra DC Adaptor Port)
Control Beep Sound
Free Power Volatage(110-220V)
Auto Power Sleep Mode
Various Accessories (Lable Printer/Barcode Printer/Barcode Scanner/Foot remote control)

2. SUMMARY

Giga which is multi functional economic SMD Counter system, is the most dedicated counter of NamA Electronic Industry Korea. The automatic Giga SMD parts counter sets up and changes over fast. Count out an entire reel or a specific number of parts to prepare for your next job, and know you've got the right amount, thanks to the Giga's Pocket Check and double-check features.

The operators can see the SMD tape effectively at the front of the machine.
Specially, Giga is compatible for AC110-220V free voltage through a controlled manner to use any country in the world.

3. Exclusive "Pocket Check" Tracks Missing Components

Component reels often are missing components, yet most counters cannot detect this condition. The Giga S counter not only counts the sprocket holes but also has "Pocket Check," which checks each pocket to verify that the component is actually there. If there is a missed part, the machine stops or pass and, before continuing, lets operator know total number of missing components. A digital readout continuously updates the true part count by subtracting missing parts.

As an additional benefit, Pocket Check will stop at the end of new reels as they typically have 5-10 inches of empty pockets at the end of tape reel. This prevents the annoyance of spinning tape whiplash.

4. Ergonomic and Easy to Use

The design of the Giga allows the operator to keep an eye on the LCD screen and the parts as they're being counted at the same time. The machine counts forward and back (for double-checking), or parts can be swiftly spooled back to their original reel.

2 type Giga vs Giga s

No	Function	Giga	Giga S	Remark
1	Motorized Auto Counter	O	O	Adopt stepping motors
2	SMD (4mm-72mm)	O	O
3	SMD Pocheck Check (Missing Parts)	X	O (8,12,16,24~48mm)	Adjustable knob control
4	Rechargeable Battery (7A)	X	X	Optional
5	Interface 1. 2 x USB Ports 2. 2 x RS232C Ports 3. Foot Remote Ports 4. 1 x Extra Power Port (DC 5V) 5. USB Port at the front	1. X 2. O 3. X 4. O 5. X	1. O 2. O 3. X 4. O 5. O	X : Optional Selection
6	Free Power Voltage 110-220V,50/60Hz	O	O

* We reserve the right to make changes without notice.

5. Operation

Place the full reel to be counted on the right side and an empty reel on the left. Manually lead the tape through the counting gears. Rotate the temp reel till the first component is aligned with the press wheel.
Reset the counter's digital display. If desired, enter a preset number of parts to be counted.
Set the pitch value as specified above.
Press the START key to start counting. Note: the counter increases or decreases whether it is moved by the motors or manually.
Rewind the tape back to the original reel by pressing the REWIND key. Rewinding also verifies the counting result.

3 Counting Mode

1	Short Moving	When you press the start button shortly, the stepping motor moves shortly. It is useful for 1~3 parts moving.
2	Normal Moving	If you want to count the parts till preset value, press the start button for 3 seconds. After the machine count the parts until preset value, it will be stopped automatically.
3	Auto Alignment Moving (Test or Double Check)	If you want to double-check the parts till preset value or check the machine's performance, press the start button for 6 seconds. After the machine count the parts until preset value, it will be rewind the reel till 0 value automatically.

6. Interface

Indicator

1	Control Panel Back Light	On Setup
2	3 x SMD,Dip LED
3	2 x USB Port Indicator

7. Accessories

8. Option

1. Label Printer
l   Bar code Label printer 225
l   Bar code Label printer 243
l   BDot Label Printer.

2. Bar Code Scanner
l Bar code scanner optic type
l Bar code scanner Laser type

3. Remode Switch

l Foot Remote switch (Start. Stop)

5. Data link Adapter ( ERP . MS Excel. other data interface )

01005 Adater option ( Inc. Barcode Printer & Scanner port )