Component Parts Counter , Counting Q'ty Automatic Writ to Excel. ERPounter

Smart SMD Counter

Axial . radial and 2mm SMD Reel pitch Count

 

​

​

product descriptions

Magic e  SMD . Axial and Radial Counter is the most versatile Component Smart Counter System among products produced by the NamA Electronics industry. It has the ability to count SMD, Axial, Radial, and parts from one counter to count three parts. In addition, it is equipped with a Pocket check function that can check missing parts, a Barcode scanner, and a Barcode Print function.

​

​

Video - Eng-

Video- Ko

​

Product overview

It operates on the basis of a 32-bit control system and consists of four individualized PCBs capable of main board, stepping motor control, and interface port key board control, making it easy for anyone to efficiently control and maintain equipment.

It operates on the basis of a 32-bit control system and consists of four individualized PCBs capable of main board, stepping motor control, and interface port key board control, making it easy for anyone to efficiently control and maintain equipment.

​

Part Counting (SMD, Axial & Radial) 2mm Hole Pitch

SMD tape type can be counted from 8mm to 72mm, Axial and Radial coefficients are possible, and there is a push marking function that can mark the position of the coefficient after the coefficient.

​

SMD Counting range

​

SMD tape type can be counted from 8mm to 72mm. There is a function that allows you to check your Miss parts pocket.

The Miss Parts Check is quickly and easily set up in the designated position through 8.12.16.24mm Step control, and the 24-48mm is set by turning the Knob to the tape.

Magic e is SMD. Axial.  Radial that can count all componet parts.

The Magic e Model is a countable SMD component parts model with a throw hole type axial, radial, and 2mm reel pitch. This is a model with upgraded features over 5 generations.

It is divided into two models: Giga and Giga S.

Giga S is a Pocket Giga Series product that can only be SMD Counting quantities.

Magic e and Giga are configured on the same Platform environment.

Giga S can be set to Pocket Check_8. 12. 16 to 72mm in Step

Last Counting quantity memory function is available.

The Printer Key has two functions
If you press it briefly, the counting quantity is saved, and if you press it for 2 seconds, the Bard Code Label Printer signal is output. 

When using a Data Link Adapter, when you press the Printer Key for 2 seconds, Excel signals and ERP are automatically transmitted.

In data link, TX signal can selectively transmit Date, Time, and Counting quantity.

This selection function can be set to Key in Data Link

 

Start Count 

Automatic Counting 

Last Counting Q'ty Memo on LCD Display.

The product quality is CE. FCC. KC. It is a stable counter model with various certifications

Axial and Radial parts counting are available, It can count various parts, contributing to more efficient parts material management.

When you want to count the throw hole parts, you can remove the SMD lock on the side Locks to the Axial or Radial coefficient position.

,

You can change the Dip coefficient setting from SMD to the Key switch

The counting function can count in both directions, and has a Push Mark function that marks the tape after the set counting quantity is completed.

Axial Parts Counting and Can mark point under Reel Tape

The counter environment settings are intuitive and can be easily set by anyone according to their needs using the 4-key multi-function key operation.

Easy Setup Counter .

The Data link Interface can be connected to the printer signal and PC USB cable.

There is no separate Drive Software Install.

Drive settings are automatically set in Data link.

Data Link is an economically priced product. 

However, it is a product that provides very fast and accurate results in improving SMD component management.

This is a data link widely used by companies that manage a large number of small-quantity SMD components.

If you use Bar Code Scanner and Data Link,

I believe you'll enjoy more SMD Counting management and work efficiency.

You do not need to input Counting Q’ty by setting it to Keyboard.

Because the counted quantity is automatically recorded in Excel ERP along with the date and time.

   Automatic Writ to Excel 

    Date. time or Counting Q'ty

  Excel 

 

    Data link 

   Easy Connnect, PC to Data link USB Port

The counter environment settings are intuitive and can be easily set by anyone according to their needs using the 4-key multi-function key operation.

end

Share: